|
DO's
|
|
DON'Ts
|
|
Put on the light/fan/coolers only when required. Use natural light
wherever possible.
|
|
Don't keep the light/fan/coolers on when not in use.
|
|
Use fluorescent tubes/compact fluorescent lamps in place of ordinary
incandescent lamps.
|
|
Aprotected void using incandescent lamps as these draw considerably higher power
than CFL/Fluorescent tubes.
|
|
Use ordinary signboards fitted with fluorescent tubes.
|
|
Don't use Neon Signboards, as the electricity consumption of such
signboard is about 10 times higher than ordinary fluorescent tube fitted
signboard.
|
|
Use right capacity capacitors with the induction motors of 5 HP &
more capacity.
|
|
Don't run the induction motors of 5 HP & above without right
capacity capacitors. It will increase the energy consumption/bill also.
|
|
Use separate control for each light/fan so that the same could be used
optionally.
|
|
Don't put the light/fans in group control. This will lead to wastage of
energy & higher billing as well.
|
|
Use only fan or coolers in the peak hours in the evening
|
|
Don't use air-conditioners at peak hours in the evening.
|
|
Use LPG for cooking instead of electric heaters/hot-plate etc.
|
|
Don't use electric heaters for cooking purpose, as it is costly in
comparison to LPG.
|
|
Keep the electric wiring in proper condition.
|
|
Don't connect the load higher than the sanctioned limit, otherwise 50%
misuse charges are leviable.
|
|
Use the domestic connection for residential purpose only
|
|
Don't use the domestic connection for non-domestic purpose, otherwise
non-domestic / commercial tariff along with 50% misuse charges are
chargeable.
|
|
Use the electricity connection for the premises only for
which it is sanctioned.
|
|
Don't extend the electricity to the other premises, otherwise
non-domestic/ commercial tariff along with 50% misuse charges are
chargeable.
|